Ethyl Ascorbyl Ether in the Korean Codex: 95.0% Assay, pH 3.0-4.5 and Five Forms

Published November 07, 2026 · SJ AI Studio

Ethyl ascorbyl ether, printed in the Korean codex as 3-O-ethyl ascorbate, is a vitamin C derivative with a raw-ingredient monograph in Annex 2, the whitening (brightening) section. It requires an assay of 95.0% or more (when dried), a melting point of 111 to 116 degrees Celsius and a pH of 3.0 to 4.5.

It also appears in four combination monographs with adenosine in Annex 5, according to the extract read for this page. The notice is published by the Ministry of Food and Drug Safety (MFDS).

Ethyl ascorbyl ether is covered here from two Korean sources read in the original: Annex 2 of MFDS Notice No. 2025-89, where the whitening monographs sit, and Article 2 of the Cosmetics Act Enforcement Rule. As Copyright Act Article 7 excludes both from protection, they are quoted directly. No product, price or ranking appears.

Which functional claim type does ethyl ascorbyl ether belong to?

Functional Claim Rules

Because ethyl ascorbyl ether is a whitening-annex ingredient, two claim types apply, items 1 and 2 of Article 2 of the Enforcement Rule. Korean text:

피부에 멜라닌색소가 침착하는 것을 방지하여 기미ㆍ주근깨 등의 생성을 억제함으로써 피부의 미백에 도움을 주는 기능을 가진 화장품

Item 1, in English: cosmetics that help brighten skin through blocking the deposit of melanin pigment, so that spots and freckles form less (the legal term is "whitening").

피부에 침착된 멜라닌색소의 색을 엷게 하여 피부의 미백에 도움을 주는 기능을 가진 화장품

Item 2, in English: cosmetics that help brighten skin by lightening the colour of melanin that is already in place.

The word "helps" appears in both items. The ethyl ascorbyl ether monograph, with its 95.0% assay, 111-116 C melting point and pH of 3.0-4.5, is a raw-material standard and states no result.

What does the ethyl ascorbyl ether monograph set?

Annex 2 of the codex includes a raw-ingredient monograph for ethyl ascorbyl ether. Its values, copied from the Korean text:

Item in the monographWhat the codex states
Other name in the codex3-O-ethyl ascorbate (3-O-에칠아스코베이트)
Formula and weightC8H12O6, 204.18
Assay95.0% or more, when dried
DescriptionWhite to pale yellow crystals or crystalline powder, bitter taste
Melting point111-116 C
pH3.0-4.5 (3.0 g in 100 mL)
Heavy metals20 ppm or less
Arsenic2 ppm or less
Loss on drying2.0% or less

How should you read the terms in the ethyl ascorbyl ether monograph?

Each row of the MFDS monograph for ethyl ascorbyl ether is a test label and a limit. The middle column offers a general description of the test and is not codex wording; the right column repeats what the monograph prints, including the 3.0 g in 100 mL condition on pH.

Term in the monographGeneral meaning of the testValue in this monograph
Formula and weightThe chemical formula and molecular weight that identify the compound.C8H12O6, 204.18
AssayThe test that measures how much of the named substance a sample contains, usually as a percentage.95.0% or more, when dried
DescriptionThe appearance the raw material must have.White to pale yellow crystals or crystalline powder, bitter taste
Melting pointThe temperature at which the solid melts, used to identify the substance and judge its purity.111-116 C
pHThe acidity of a solution prepared under the stated conditions.3.0-4.5 (3.0 g in 100 mL)
Heavy metalsA limit test for metallic impurities, reported as a group in parts per million (ppm).20 ppm or less
ArsenicA limit test for arsenic as an impurity, in ppm.2 ppm or less
Loss on dryingThe share of the sample's mass lost when it is dried under stated conditions, mostly water and other volatile matter.2.0% or less

According to the MFDS monograph for ethyl ascorbyl ether, the assay (95.0% or more, when dried) is a floor, the melting point (111-116 C) and pH (3.0-4.5) are ranges, and heavy metals (20 ppm), arsenic (2 ppm) and loss on drying (2.0%) are ceilings. They describe the raw crystals, not any of the five finished forms.

How does the ethyl ascorbyl ether assay compare with other codex ingredients?

Ethyl Ascorbyl Ether Codex Values

Below, the MFDS raw-ingredient monographs read for this site are sorted by the bottom of the assay range. Ethyl ascorbyl ether, at 95.0% or more when dried, is one of three entries tied at that level:

IngredientAnnexAssay as printed in the monograph
Salicylic acidAnnex 899.5% or more
Zinc oxideAnnex 499.5% or more, after ignition
AdenosineAnnex 399.0% or more
BiotinAnnex 998.5-101.0%, on the dried basis
ArbutinAnnex 298.0% or more
Ascorbyl glucosideAnnex 298.0% or more
DexpanthenolAnnex 998.0-102.0%, on the anhydrous basis
L-mentholAnnex 998.0-101.0%
NiacinamideAnnex 298.0% or more, when dried
Ascorbyl tetraisopalmitateAnnex 295.0% or more
Ethyl ascorbyl ether (this page)Annex 295.0% or more, when dried
PEG-retinamideAnnex 395.0% or more
Titanium dioxideAnnex 490.0% or more, when dried
Zinc pyrithioneAnnex 990.0-101.0%, when dried

In the MFDS codex, ethyl ascorbyl ether ranks 10 of 14 by the lower assay limit among the monographs read for this site, with 9 entries above it and 2 tied with it. Its 95.0% floor is lower than the 98.0% of ascorbyl glucoside and equal to ascorbyl tetraisopalmitate.

Where does it appear besides Annex 2?

Annex 5 of the codex, the section for products that help with both whitening and wrinkles, contains combination monographs that pair one whitening ingredient with adenosine. Ethyl ascorbyl ether appears in four of them, each pairing it with adenosine. As printed in the MFDS codex, each requires both ingredients to be at 90.0% or more of their labelled amounts.

That makes ethyl ascorbyl ether one of six whitening ingredients that Annex 5 pairs with adenosine, alongside niacinamide, ascorbyl glucoside, arbutin, alpha-bisabolol and the oil-soluble licorice extract.

The pH line of the raw material is worth noting: 3.0 to 4.5 for a 3.0 g in 100 mL solution. The codex prints it as a test condition. It is not a pH requirement for a finished product.

Is there a finished-product monograph for ethyl ascorbyl ether?

Key Codex Metrics

Yes. Annex 2 includes finished-form monographs for ethyl ascorbyl ether in five forms. According to the MFDS codex, each requires 90.0% or more of the labelled amount.

ethyl ascorbyl ether label checklist

How to check a ethyl ascorbyl ether claim yourself

Use levels of ethyl ascorbyl ether in any product. They sit in other MFDS rules not read for this page.

Every functional type and its codex ingredients are grouped in our K-beauty functional ingredient index.

Sources and how to check

Codex Legal Sources

Questions readers ask about Ethyl Ascorbyl Ether in the Korean Codex

Does ethyl ascorbyl ether have a monograph in the Korean codex?

Yes. Annex 2 of the MFDS functional cosmetics codex (Notice No. 2025-89) has one, under the whitening type.

What is its other name in the codex?

3-O-ethyl ascorbate, written 3-O-에칠아스코베이트.

What melting point does the monograph give?

111 to 116 degrees Celsius.

Does it appear in combination monographs?

Yes. Annex 5 pairs it with adenosine in four finished forms.

Is the 3.0-4.5 pH a product requirement?

No. The monograph states it for a 3.0 g in 100 mL solution of the raw material.

Related articles