L-Menthol in the Korean Hair-Loss Annex: 98.0-101.0% Assay and a 42-44 C Melting Point

Published October 26, 2026 · SJ AI Studio

L-menthol is one of the raw ingredients with its own monograph in the Korean codex annex for hair-loss symptom relief. The monograph, published by the Ministry of Food and Drug Safety (MFDS), requires an assay of 98.0 to 101.0% and a melting point of 42 to 44 degrees Celsius.

Those numbers describe the purity and identity of the raw material. They do not make menthol a hair-loss treatment, and they say nothing about how much menthol a finished product holds.

Every figure for L-menthol on this page was read in Korean from two sources: Annex 9 of MFDS Notice No. 2025-89 (the codex of Standards and Test Methods for Functional Cosmetics, abbreviated KFCC in its general annex) and Article 2 of the Cosmetics Act Enforcement Rule. Because Copyright Act Article 7 excludes such notices from protection, the text is quoted as printed. Nothing here refers to a product, a price or a ranking of brands.

Which functional claim type does L-menthol belong to?

Checking a menthol claim

L-menthol sits in the hair-loss annex, so the claim type that matters is item 8 of Article 2 of the Enforcement Rule, the closed list of functional cosmetics. Its Korean text:

탈모 증상의 완화에 도움을 주는 화장품. 다만, 코팅 등 물리적으로 모발을 굵게 보이게 하는 제품은 제외한다.

In plain English that item reads: a cosmetic that helps relieve hair-loss symptoms, minus products that only thicken the look of hair with a coating or similar physical effect. A cooling feel on the scalp is not part of this wording.

The claim "helps" relieve hair-loss symptoms, and the proviso excludes products that only make hair look thicker physically. The monograph for an ingredient in Annex 9 does not change that wording.

What does the L-menthol monograph set?

Annex 9 of the codex, the monographs for cosmetics that help relieve hair-loss symptoms, includes a raw-ingredient monograph for L-menthol. Its values, copied from the Korean text:

Item in the monographWhat the codex states
Formula and weightC10H20O, 156.27
Assay98.0-101.0%
DescriptionColourless crystals with a characteristic refreshing smell; the taste is first pungent, then cool
VolatilitySublimes slowly at room temperature
Specific rotation-45.0 to -51.0 degrees
Melting point42-44 C
Evaporation residue1.0 mg or less (from 2.0 g)

How should you read the terms in the L-menthol monograph?

The L-menthol monograph lists each test as a label and a limit. The middle column below is only a general description of what such a test measures, not something the codex says; the right column repeats what the monograph prints for L-menthol.

Term in the monographGeneral meaning of the testValue in this monograph
Formula and weightThe chemical formula and molecular weight that identify the compound.C10H20O, 156.27
AssayThe test that measures how much of the named substance a sample contains, usually as a percentage.98.0-101.0%
DescriptionThe appearance the raw material must have.Colourless crystals with a characteristic refreshing smell; the taste is first pungent, then cool
Specific rotationHow strongly a solution of the substance turns polarised light, a standard identity check.-45.0 to -51.0 degrees
Melting pointThe temperature at which the solid melts, used to identify the substance and judge its purity.42-44 C
Evaporation residueThe material left behind after a sample is evaporated.1.0 mg or less (from 2.0 g)

In the L-menthol table the assay (98.0-101.0%) and the melting point (42-44 C) are ranges that bound a value from both sides, whereas the evaporation residue of 1.0 mg from a 2.0 g sample is a single ceiling. Neither kind of number says how much menthol a finished product holds.

How does the L-menthol assay compare with other codex ingredients?

L-menthol codex values

This table, built from the MFDS codex, puts L-menthol next to the other raw-ingredient monographs read for this site from the same codex, sorted by where each assay range begins. L-menthol starts at 98.0%, level with four other entries:

IngredientAnnexAssay as printed in the monograph
Salicylic acidAnnex 899.5% or more
Zinc oxideAnnex 499.5% or more, after ignition
AdenosineAnnex 399.0% or more
BiotinAnnex 998.5-101.0%, on the dried basis
ArbutinAnnex 298.0% or more
Ascorbyl glucosideAnnex 298.0% or more
DexpanthenolAnnex 998.0-102.0%, on the anhydrous basis
L-menthol (this page)Annex 998.0-101.0%
NiacinamideAnnex 298.0% or more, when dried
Ascorbyl tetraisopalmitateAnnex 295.0% or more
Ethyl ascorbyl etherAnnex 295.0% or more, when dried
PEG-retinamideAnnex 395.0% or more
Titanium dioxideAnnex 490.0% or more, when dried
Zinc pyrithioneAnnex 990.0-101.0%, when dried

In the MFDS codex, L-menthol ranks 5 of 14 by the lower assay limit among the monographs read for this site, with 4 entries above it and 4 tied with it. L-menthol's assay is a two-sided range, so the codex caps it from above as well as below.

What do the unusual descriptions in the monograph tell you?

Most monographs in the codex describe a powder or a liquid. The L-menthol entry also records that it sublimes slowly at room temperature and gives a taste: first pungent, then cool. These are identification notes for the raw material, written for a laboratory.

The only impurity-style limit is the evaporation residue: no more than 1.0 mg from a 2.0 g sample. Unlike the powders in the table above, L-menthol has no heavy-metal or arsenic line in the extract read for this page, so this page does not claim one exists or does not exist in the full notice.

The codex also prints a negative specific rotation of -45.0 to -51.0 degrees without explaining the chemistry, and this page keeps to what it prints.

Is there a finished-product monograph for L-menthol?

The extract of the codex read for this page records that Annex 9 has no finished-product monographs, a note made on the zinc pyrithione entry of the same annex. The codex therefore says nothing about how a finished product containing L-menthol is tested.

L-menthol label checklist

Menthol label checklist

How to check a L-menthol claim yourself

Use levels of menthol in any product. The codex sets none; limits sit in other MFDS rules not read for this page.

Every functional type and its codex ingredients are grouped in our K-beauty functional ingredient index.

Sources and how to check

Questions readers ask about L-Menthol in the Korean Hair-Loss Annex

Is L-menthol a functional hair-loss ingredient in Korea?

It has a raw-ingredient monograph in Annex 9 of the MFDS functional cosmetics codex (Notice No. 2025-89), the section for cosmetics that help relieve hair-loss symptoms.

What melting point does the monograph give?

The codex states 42 to 44 degrees Celsius.

What assay does the codex require?

98.0 to 101.0%.

Does the codex say how much menthol a product contains?

No. Use levels are outside the codex, which is a quality reference for the raw ingredient.

Is there a finished-product monograph?

The extract read for this page records none in Annex 9.

Related articles